产品描述
专业从事混凝土制品脱模剂的研发、生产、销售于体的高新技术生产企业
| Metal cleaning | JY-338 | 建议原液或添加量为3%-6%； | Metal cleaner is a water-based cleaner with high cost performance and wide versatility. It is suitable for degreasing cleaning of most metals and can be used for all kinds of high-demand cleaning; the product uses surfactants, chelating agents and other high-quality raw materials to react It has strong cleaning power. After cleaning, the product can pass various cleanliness tests. |
| 空调清洗剂 | 原液 | 清洗内机蒸发器，外机冷凝器，使管路之间通风顺畅，增加制冷效果。还有内机长时间使用之后回有异味，清洗剂可以清除异味。 | |
| wafer cleaning | 3M36 | 建议原液添或1:5以内 | It is used to clean the photosensitive chip of various mobile phone camera CSP products; it is mainly used to remove the chip surface dirt, bonding wax, PCB&FPC flux residue, grease, dust, metal oxide, microbial dirt, polymer dirt, and carbohydrate carbon deposit; applicable Ultrasonic cleaning and spray cleaning requirements |
| wafer cleaning | PL31 | 建议1:15 | Used for cleaning various chips, high-end circuit boards, camera modules VCM and other ultra-precision electronic components; mainly used to remove surface dirt, PCB&FPC rosin flux residues, grease, dust particles, and a small amount of residual glue; suitable for ultrasound Cleaning and spray cleaning requirements. |
| 陶瓷清洗剂 | |||
| 光学清洗剂 Optical cleaner |
建议1：15-25 | Used to clean the dirt, dust, fingerprints, oil, polishing powder and other residues on the surface before various optical coatings | |
| 玻璃清洗剂Glass cleaner | 建议1：15-25 | Used in glass cleaning in various industries such as construction, decoration, automobile, electronics, and optical instruments. | |
| 船舶清洗剂 | 能够迅速清除油污、锈斑、灰尘等污迹，清洗后光亮如新，并具有保护修复作用。 | ||
| 军舰清洗剂 | 舰船油舱、机舱、输油管、甲板、机舱板、淡水舱、码头、油罐、油罐车及加油泵等设备 | ||
| 碳氢清洗剂 | 原液 | 1.广泛用于机械部品、电子部品、光学部品生产加工中的污渍清洗2.用于汽车、电机电子、机床加工、精密机械等部件的洗净;3.用于切销、拉伸、穿孔、压延、研磨、热处理前后，电镀上漆之前的洗 | |
| 溶剂清洗剂 | 用各种有机溶剂对金属表面上油污的溶解作用，达到清洗的目的 | ||
| 水性清洗剂 | 广泛用于机械零件、五金材料、机床设备、车辆引擎、工厂油污等除油清洗。 | ||
| 环保清洗剂 | |||
| 中性清洗剂 | JY-6001 | 建议1：20 | 1、各类铝材，尤其是七系铝，压铸铝，常规清洗很快就会出现氧化点，6001在清洗干净表面油污的前提下，还可保证清洗后5-10天不会出现氧化现象，且不影响后续阳极氧化处理、注塑、喷涂等对附着力有要求序。2、各类铜件，包括黄铜、紫铜、杨白铜等，清洗不影响材质本色 具备短期抗氧化效果，长期抗氧化建议清洗后做钝化或抗氧化处理。3、各类塑胶件，主要清洗表面脱模剂及各类油污，对塑胶材质无任何影响。4、6001清洗后产品均可过表面张力测试。 |
| Bright cleaning agent 光亮清洗剂 |
JY-1257 | 建议1：20 | 1、Mirror polishing: After cleaning and polishing, there is residual polishing liquid and account dirt on the surface. The common mirror polishing is mostly aluminum or stainless steel. It is relatively easy to clean after stainless steel polishing, but aluminum is easy to be corroded, and the difficulty of cleaning after mirror polishing is greatly increased. JY-1257 With ultrasonic, it can completely clean the dirty surface, and the mirror effect will be better after cleaning (mirror aluminum should avoid excessive ultrasonic frequency, and the temperature should be controlled within 40-50°C). 2. Power battery shell: Most of the stains on the surface of the power battery shell are black spots caused by stretching oil, flux, welding, and stretching. Common cleaning generally requires 2-3 cleaning procedures. JY-1257 treats oil, flux, and Black spots have a good cleaning effect, and at the same time have a good brightening effect. 3. Oxidation removal: common non-ferrous metals such as copper, aluminum, iron and other materials are prone to oxidation during the processing. 1257 can effectively remove the surface oxide layer of the product while degreasing, reducing the color and brightness of the metal without affecting it. size. Note: Anti-oxidation treatment must be done immediately after cleaning the rust-prone material |
| 重油污清洗剂 | JY-825G | 建议1：10-20 | 1、适用于机械设备及各类零部件的重油污清洗(如:黄油、机油、油垢等);2、超强除油能力，适合浸泡、超声波清洗、刷洗等工艺3、清洗剂采用合理的原料搭配及生产工艺，使用寿命及效果超出同等价位产品。 |
| 航空清洗剂 | 参照波音D6－17487、空客AIMS09－00－002等标准研制的水基型飞机表面清洗剂。是由多种优良的非离子表面活性剂及洗涤助剂,经科学复配而成,完全可以取代传统的飞机表面清洗剂 |
在线留言